Specification:
Type | Split Type |
Max Temperature | 1200℃ |
Continue Operating Temp. | 1150℃ |
Heating Element | Kanthal “A-1” Wire in Coil Form |
Insulation | First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket.
High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity |
Temperature Accuracy | ±1℃ |
Thermocouple | K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube |
Temperature Controller | PID automatic control via SSR power control with phase angle fired, current limiting resistor.
1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type.
Over temperature protection and alarm allows for operation without attendant |
Electronic Component | Autonics / Schneider / L&T Electronics Brands |
Heating Rate | ≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace) |
Safety Protection | Overheat And Thermocouple-Break Alarm |
Certification | NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified |
Furnace Shell | High Quality GI Sheet With PP Powder Coated |
Accessories | One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual |
Optional | Quartz / Alumina Bot |
Warranty | One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. |
Using Attentions | The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min. Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence |
Model | Hot Zone Length 1 | power Supply |
HE-STF-1200P | 300 mm | 220 V/ 5 KW Single Phase |
Related Products
You Might Like Also
1700°C High Temp Furnace
Application:- 1700°C High Temp Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment For Industrial Colleges, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Read More
FUME HOOD
FUME HOOD APPLICATIONS The core application of a fume hood is fume removal also minimizing nuisance odors. It is used in laboratory where some important tasks are preformed such as solvent mixing, soldering and working with volatile organics, powder and flammable chemicals, different types of acids and low odor thresholds etc. and all these tasks Read More
Vacuum Ovem
Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry steriliza Read More
Tube Furnace
Application:- 1700°C High Temp. Tube Furnace Mainly Provides High Temperature Heat Treatment Environment for Industrial, Research Institutes, Factories and Other Industrial Laboratories, and Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, and Semiconductor Materials. Read More
Tube Furnace
Application:- 1200°C Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment for Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Read More
1800 Degree Muffle Furnace
Application:- 1800°C High Temp Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment For Industrial Colleges, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Read More
